Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Saturday, October 16, 2010

Talking Carl Doll Tutorial

Talking Carl Stuffed Doll or Plushie Tutorial

Materials:
2 pieces of 18 inch x 18 inch red felt
1 piece of 18 inch x 18 inch gray felt
black and white felt scraps for eyes
thread
paper for pattern drawing
stuffing

Draw pattern on paper.


Draw a half-inch seam allowance around the outside of the body of your sketch. I used a red line.


Cut out pattern along red line.


Fold the pattern in half to make sure it is symmetrical.


Draw arms, eyes, pupils, and mouth patterns. I used the "big mouth" version of Talking Carl.


Cut out the patterns for the body parts. One boo-boo.... It should say "x4" on the arms.


Cut out the body and body parts from the paper pattern.



This is what you should have so far:


Now, make the gray mouth by following the sketch on the front body pattern and adding a 1/2 inch seam allowance around the mouth. I used chalk to draw on the "wrong" side of the felt.





Cut out the mouth, allowing for the seam allowance.

Cut out the mouth "dangley part" out of red felt and pin it onto the gray mouth "opening." Pin and stitch.






Trace the mouth shape (not with seam allowance) on the wrong side of the body front with chalk.


Cut a slit in the middle of where the mouth will be.


Continue cutting along the chalk line to make the opening for the mouth. Match up the right side of the mouth under the right side of the body front (mouth opening) and PIN it really carefully. Make sure there is plenty of seam allowance under the mouth opening. Stitch on the right (top side) through both pieces, close to the edge of the red felt.



This is what it looks like when you're done:


And here is what the back looks like:


Cut out, pin, and stich arms, leaving straight edge open. Stuff the arms.


Pin white eye pieces together. Stitch, leaving a 1 inch gap. Turn and stuff.



Figure out where you want the pupils to be on the eyeballs...


Pin stuffed arms facing inward on the right side of the body front.



Tack the arms down with a few stitches close to the edge. Put right sides of the 2 body pieces together and sew around the body, leaving a 3 inch opening at the bottom on the straight edge of one of the feet.


Clip curves and snip corner between the legs.


Turn the body right side out, using a chopstick to poke out corners.


Now Carl will look like this:


Using white thread, stitch the bottoms of each stuffed eyeball closed. Then use a whipstitch to sew the eyes to the rounded corners of the top of the head.



Using black thread, sew the felt pupil pieces to the white eyeballs. I made mine looking up. Then pin the seam allowance down on the opening of the body to prevent stretching of the felt while you stuff the body.


Stuff the body full of toy stuffing.


When the body feels nice and full, use red thread to whipstitch the bottom opening closed.

Ta-da!!






















Wednesday, January 13, 2010

How to Turn a Jpeg into an Embroidery Pattern

Here is a nice link to a tutorial to follow by ReginaE of Ehow with directions on how to convert a jpeg image into an embroidery pattern. Note: transfer paper is on the supply list.

I used my version of Photoshop Elements to convert one of the cupcakes from last week's pattern into a transfer image.


This image can be printed on iron on transfer paper for light colors and used as a template. I'm going to try it and will post pictures of how it's going! Will also try it with plain ole tracing paper, too.

Thursday, December 3, 2009

Anything You Can Do...

...I can do...after watching you do it 80 hundred times, stopping and starting the youtube video every 1.2 seconds, and practicing it with 3 miles of yarn.

An excellent crochet flower tutorial from LittleBirdieSecrets can be found here. And yet, even with all of that help, I remain crochet-impaired. The proof is below...all 5 are from the same video with the same VERY simple baby steps. !!!

Wednesday, July 22, 2009

Tutorial: How to Make a Sink Skirt


If you have an old bathroom like me, you probably have a sink with exposed pipes. Yuck! Plus, you don't have the benefit of under-sink storage. So an easy option to cover up the uglies is to make a sink "skirt." Here's how to do it...

Before:

Obtain some velcro-type fastener stuff. I used Velcro brand "Home Decor" tape. One side is a peel-off adhesive and the other side is made for you to stitch.

So stick the adhesive side around the edge of your sink like this:


Measure the distance around your sink and from sink to floor. Add about 1/2" to measurements on each side for a seam allowance. If you want to add pleats or a gathered look, add extra width to account for this. Cut your fabric to these dimensions as well as your trim if you want to add it.

Note: I did not accurately measure the length from sink to floor, so my skirt came out too long. I was lazy and just took up the excess in a "fold" and restitched. You will see this in a later photo.

Press a 1/2" seam allowance around all edges of the fabric. If you want a pleat along the top edge, press the pleat and pin to secure it.



Next, pin the velcro along the top edge of the skirt.


Pin the trim along the bottom edge of the skirt. Stitch all the way around the 4 sides of the skirt, through the velcro and through the trim. I used a 1/4" seam allowance.

Stitch a second row along the velcro edge in order to secure both sides of the velcro to the fabric.



This is what the top should look like if you included an inverted pleat.


Because my skirt was too long, I "hitched" it up a couple of inches.


Then I did the responsible thing and actually checked to be sure my new length was correct.


I secured the new length with two rows of stitches. In the picture below, you can see that the edges did not line up evenly. Oh well!


Nevertheless, it is an improvement over the naked sink and now I can hide some unsightly stuff behind the skirt!




Now, would a matching toilet skirt be going overboard???